Table 1. SK-80 It can be used at the highest airflow rate of all styles. １．Especially when the low pressure loss is required. ２．Conditions where clogging is likely to occur ３．Collection of large mist. ４．When high efficiency is not required. This style is usually used at a thickness of 150 mm, but it is necessary to increase the thickness further in order to achieve efficiency equivalent to SK-192. SK-192 is the most commonly used style. It is possible to obtain almost 100% collection efficiency for particles of 5 to 10μm. The pressure loss is slightly higher than the previous type. Used to collect SW-216 micro mist. Especially in the case of a low concentration of 10 g/m3 or less, it is effective to use it with a thickness of 200 to 300 mm. SW-432 is the highest density style. It is used to collect very fine mist at high efficiency, which is higher than SW-216. High efficiency is possible even if the thickness is thin. A Demi Star made from CMG fiberglass or synthetic fibers and made by a special knit manufacturing method. It is heat-resistant, acid-resistant, lightweight, and economical style, and has the same catch effect as other Demi stars. Style and its features SK-192 SW-216 SW-432 CMG
RkJQdWJsaXNoZXIy NDY3NTA=