10 Sintered wire mesh SINTERED WOVEN WIRE MESH's unique sintering technology is an integrated structure of wire mesh over various types. The ideal filtration structure is achieved through multilayer sintering. With our own sintering technology, various wire meshes are combined to form layers. Features・Since the mesh is separated from each other by the wire mesh of each layer, it is possible to form an ideal filtration structure that is fine and uniform. ・The apertures in each layer are divided by the next layer, promising even finer and more uniform filtration. ・It can keep the same opening even under high pressure because wires are bonded well together at the contact points after sintering. ・All wires are fused to each other, so do not dislocate even under high pressure. ・It is excellent in backwashing and can be reused repeatedly. ・Can easily be cleaned by backwashing. ・It's excellent in corrosion resistance. ・Depending on the type of high corrosion resistance wire mesh, the number of laminated layers, pressurization, and sintering, it can be used as filter media with distinctive features such as poammet, Bonn mesh, and poaflo. Sintered woven wire mesh include POREMET, BONMESH and POREFLO, differing in the component wire meshes, number of layers, the sintering method and pressures applied. ※The filtration granularity described on the right page is nominal value. Flow rate - Pressure loss graph shows an example of experimental results. Filter ratings in right-hand page are nominal values, and graphs show the experimentally determined relationship between flow rate and pressure drop. COMBINATION-PERFORMANCE Clears excellent pressure resistance and harsh conditions
RkJQdWJsaXNoZXIy NDY3NTA=