13 Two or three flat-tatami Zhijin nets with the same mesh are compressed and melted strongly. Consists of two or three layers of plain dutch mesh. Each layer has the same designation and is strongly calendered and fused together. 1st layer 2nd layer 2nd layer (3rd layer) 3rd layer This porous plate strongly compresses and melts the POREFLO wire mesh, and demonstrates its properties in the transport, drying, and prevention of adherence, as well as in rectification and sprinkling of powders. The pressure resistance strength is almost the same as Poamette. 2-layer type, 3-layer type, and the larger resistance are No. There are 1 to No.12, but other types can be manufactured depending on the usage conditions. In addition, there is a directivity type that blows flow air at a certain angle. Porous plate made of sintered wire mesh which is heavily calendered. Suitable for powder transportation, drying, flow rectification and uniform air output. Pressure resistance is nearly equal to that of POREMET. Available in two-layer and three-layer types. No.1 - No.12 represent the pressure drop from high to low, No.1 having the highest resistance. Other specifications and Directional type are also available upon request. Flow rate - Air pressure loss Flow rate vs. pressure drop Air pressure drop (20°C) Air pressure loss ΔP (kPa) pressure drop 10 10-1 10-1 10-1 Flow rate Q (l/n/cm2) Flow rate Poafro T type (3 layer structure) - 05 -06 -07 - 08 -10 -10 -1 -1 - 1 - 1 - 1 - 1 1 1 - 1 - 1 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - Temper
RkJQdWJsaXNoZXIy NDY3NTA=