17 Support mesh support wire mesh material BEKIPOR Material Processing New Spiral Retainer Leaf Disk Filter with Spiral Retainer Retainer Retainer Reinforcing Network (S-mesh: φ0.125 × 48mesh) can also be integrated by sintering. Bekipor is available in combination with one or both sides with reinforcement by sintering support wire mesh （S-mesh:φ0.125×48mesh）． S type One-sided reinforcement SS type: Double-sided reinforcement S type: Single sided reinforcement SS type： Both sided reinforcement Other K-mesh (φ0.25 x 40mesh), N-mesh (φ0.19 x 30mesh) Others: K-mesh (φ0.25 x 40mesh), N-mesh (φ0.19 x 30mesh) Standard AISI316L Standard: AISI316L Other Inconel 601, Alloy HR, and Fecraloy can also be produced. Others: Inconel 601 (trade of Inco Alloys.), Alloy HR, Fecralloy (trade of U.K.A.E.A.) Inconel is Inco Alloys. and Ferkroy is a trademark of U.K.A.E.A. It can be processed into various shapes such as discs, candles, and pleats (excluding the DL4 type). BEKIPOR can be processed into various shapes including disk, candle, or pleated candle (except for DL4), etc. Unlike conventional wire mesh retainers, the flow of polymers is uniform in the circumferential direction. In addition, cleanability is improved by making filter material separable. Uniform polymer flow at any position on circumference which is not possible with conventional mesh retainer. Element can be disassembled for higher cleanability. Retainer Spiral Retainer 0.30 Velocity [m/s] 0.25 0.20 0.15 0.15 0.10 0.05 0.00 45 90 135 180 225 270 315 360 360 Reap Examper :
RkJQdWJsaXNoZXIy NDY3NTA=