24 Tension hook TENSION HOOK Flow direction and mesh direction R V2 inner width and outer width d V1 flow direction of processing material flow direction slot L side tension slot S side tension slot S end tension slot L end tension slot L end tension ton cap wire mesh, tie rod wire mesh, etc. There is a mesh direction (slot) relative to the flow direction of processing material. ※Please specify either the inner width or the outer width. Hook No. V1 (mm) V2 (mm) d (degree) R (mm) Hooke plate thickness (mm) stainless steel 1 30 (50)6 2 25 (25) 50 5 3.0 3.2 3 25 (25) 45 3 1.5 1.6 1.0 1.2 4 25 (25) 45 3 1.2 1.0 1.2 1.2 1.25 1.2 1.2 25 45 1.5 1.5 1.5 1.5 1.5 1.5 25 1.5 (25 1.5 25 1.5 1.5 25 1. ※The size of V2 varies slightly depending on the thickness of the wire mesh. ※Hook No. 3 to 5 can be riveted on the V2 part. ※Hooks No.6 and No.7 are hooks without rivets and have the same effect as with rivets. Tension hook Standard specification Wire mesh terminal processing (typical example) Fray-proof welding bend silicone application (EVA welding can also be done)
RkJQdWJsaXNoZXIy NDY3NTA=