26 New steel types have been added to the KMG mesh, which was developed as a countermeasure against foreign contamination. Foreign matter contamination due to breakage of the wire mesh must be avoided, especially in the food and pharmaceutical manufacturing process. Therefore, we provide a magnetic wire mesh "KMG Mesh" so that we can collect the fragments even if the wire mesh is broken. In order to further extend the service life of KMG Mesh, we have developed a higher-strength steel product "Dermaloy" in addition to the conventional steel type "KNM21". The KMG mesh can be selected from the following two types of magnetic materials. １．Magnetic stainless steel "KNM21" wire mesh (patented) 2. High durability and magnetic stainless steel "Dharmaroy" wire mesh applied to applications where ferromagnetic wire mesh is required. It is possible to weave up to φ0.1 or more * 100mesh. Applicable wire rod diameter φ0.6 or less for applications that require a wire mesh with excellent wear resistance and fatigue resistance. ： Dermaloy I (weaving up to about 350mesh / patented) exceeds φ0.6 ： Durmalloy II ※(Weaving up to φ1.6mm is possible / patent application is being filed) ※Dharmaroy II We have developed a high-strength steel type Dharmaroy II in a thick wire diameter area exceeding φ0.6, which could not be supported by Darmaroy I until now. Moreover, it has a high level of corrosion resistance and it has strong magnetism second to KNM21. Please refer to the various evaluation results on the right page. (Supplement) Comparison of SUS304 ： Based on SUS304, a general austenitic stainless steel, a standard (“1”), various evaluation results are graphed relatively. KMG Mesh R
RkJQdWJsaXNoZXIy NDY3NTA=