So there is no dirt or foreign matter! In order to prevent damage to the drum protector during use, the edge is finished uniformly and smoothly by self-motivated. The standard is the acid washing treatment of the edge welding part and the degreasing treatment of the entire belt, so that it does not get dirty even if the food is placed directly 3 Clean finishing welding blending and filling is constant by self-motive, and measures to prevent oxidation and sharpening. ⑥We manufacture belts that can be used with peace of mind under thorough quality control as ISO certification factory JQA-QM4482 Kansai Wire Netting Co., Ltd. Osaka Plant With confidence, we highly recommend using our own high abrasion resistance rod, and using the shape of the piece that is hard to wear, greatly reduces the growth of the belt. 5 Abrasion resistance rod and penetration small space, most of our belts can be used in a curvature radius of 2.0 times the width of our belt width, so that we can greatly reduce the wear resistance to wear resistance 5 Abrasion resistance rods and penetration small space, so that we can reduce the wear resistance to wear resistance to wear resistance Weldness of 4 small width of oxidation and oxidation is oxidation and wear resistance to high Welization is high Wenickness and high Welization is high Weld Weld Breakage in short period can be prevented. Most of our belt can be used at smaller radius of cage; Inside Radius = Belt Width x 2.0. With our original rod and link, belt elongation due to friction between these parts can be reduced very much. Our company have manufactured spiral tower belt since1973. Our factory with qualification of ISO 9001is producing belt under reliable quality control . Belt edges are automatically finished to have constant smooth surface. No damage on cage bar with contact of belt at all. Pickling on all welded parts and degreasing whole belt are our standard procedures. Food directly put on belt will get no dirt.
RkJQdWJsaXNoZXIy NDY3NTA=