CURVE CONVEYOR BELT 35 Curve Conveyor is used for connecting lines and changing directions. Sprocket drive enables reliable and stable operation. The curve conveyor is used for line connection or direction change. The sprocket drive ensures reliable and stable running. ■Typical specification of CR1 (nominal size) ■Typical specification of CBL (nominal size) Type Pitch (mm) Inside pitch line Diameter R (mm) Inside R 19.05 15.875 6.0 5.0 5.0 762 Type Pitch (mm) Inside pitch line Diameter (mm) Wire diameter node Number of spans Net width R (mm) Inside R Inside R CBL 7 1.8 5 7 9 11 13 400 600 80 100 600 600 10 60 60 600 60 10 60 60 60 60 60 60 60 60 60 Common specification of CBL (40 Common specification of CBL (mm) Common specification of CBL ■Standard specification of CFW (nominal size) ■Standard specification of CCSP (CCF2) (nominal size) Specification CFW-24-27.4-5.0-(1.5 x 12.7) CFW-18-27.4-5.0-(1.5 x 12.7) ※The minimum curvature radius is 2.2 times that of the belt width ※Min. inside R = Belt width x 2.2 ※Depending on the chain manufacturer and material, it may be smaller than the dimensions shown in the table above. ※It may be smaller than value in the table according to chain maker and type of material. CR1, CBL, and CCSP (CCF2) are only for curves, and the inner curvature radius is fixed. LR, LF2, and CFW can be combined with curves and straight forwards with a single belt. For more information, please contact us. CR1,CBL and CCSP(CCF2) are only used for curve and inside radius is fixed. LR,LF2 and CFW are flexible to be used for both curve and straight in one belt. Please contact for details. Chain No. Outside 40 50 60 60 60 60 40 × 2 60 80 50 × 2 80 60 × 2 400 500 600 600 100 400 100 100 300 500 200 200 600 R=4 W R=2, W R=5, W R=5/3, W R=W R=W R=3, W R=W ※The minimum value of the inner curvature radius Min. inside radius ※The relationship between the inner curvature radius (R) and Chain c/c (W) curve conveyor belt CURVE CONVEYOR BELT Table 25 Table 26 Table 27 Table 27 Table 28 Table 28
RkJQdWJsaXNoZXIy NDY3NTA=